This product introduction--

Product material-

Hardware/Electronics/Plastic

Product Code：SCY-16106

Product Name：1/16 Electric 4WD Buggy (Desert Card)

Colour:red/dark grey

Battery: 7.4V 1300mAH 10C lithium-ion battery (T-plug)

Charging: USB cable

Light configuration: LED headlight, LED roof front light, LED roof rear light

Differential structure: front and rear nylon gear planetary differentials

Motor: RC390 high-speed carbon brush strong magnet (magnetic protection + heat sink)

ESC: 30A 2S integrated control (splash-proof)

Product speed (km/h): 38

Remote control time (minutes): 15-18

Charging time (min): 180-210

Remote control distance (m): ≥80

Product specification (cm): 32*20.5*14

Remote control specification (cm): 13*7.5*21

Colour box specification (cm): 33.5*19.4*23.7

Protection function:

1. charging; 2. jamming; 3. high temperature; 4. low voltage

Product Configuration:

1, the whole car 2, remote control 3, English manual 4, lithium battery 5, USB charger 6, double side door DIY stickers 7, shock-absorbing adjustable buckle 8, metal pins 9, small cross screwdriver

Product features:

1, the use of simulation structure design, with a real car control feeling, to achieve the full ratio of stepless speed, high speed, rapid acceleration, deceleration, braking, reversing, left turn, right turn;

2、Applicable venues: flat ground, sand, mud, grass.

3, 4WD drive: front and rear upright spring damping, double-wishbone independent suspension system;

4, 2.4G full scale synchronous remote control system . Full ratio throttle/steering;

5, 2.4G anti-splash four-way 30A integrated ESC/receiver;

6, Front wheel cross ball head universal joint drive shaft, rear wheel split dogbone drive shaft;

7、Five line 17G servo;

8, super battery power: 7.4V, 18650-1300mAh Li-ion battery (T plug), discharge multiplier 10C;

9, The whole car adopts 16 ball bearings;

10、Metal second floor plate, metal front and rear arm code, metal centre drive shaft;

11, The car shell adopts high toughness explosion-proof PVC shell + high strength anti-roll skeleton;

12, the car shell is equipped with LED front light, LED roof front light, LED roof rear light; (three modes: normal light, slow flash, fast flash);

13, Simulation off-road tyres, strong grip;

Product Code：SCY-16106PRO

Product Name：1/16 Electric 4WD Off-road Vehicle (Desert Card)

Frequency: 2.4GHz (support multiple vehicles in the same field)

Product colour: purple/blue

Remote control battery: 3*"AA"(need to buy separately)

Product Battery: 7.4V 1500mAH 15C lithium-ion battery (T plug)

Motor: 2847 brushless motor (4000 KV value)

ESC: 35A 2S integrated control (splash-proof)

Product speed (km/h): 70 (top speed)

Remote control time (min): 15-18

Charging time (min): 180-210

Remote control distance (m): ≥120

Product specification (cm): 32*20.5*14

Remote control specification (cm): 13*7.5*21

Colour box specification (cm): 33.5*19.4*23.7

Product configuration: 1, the whole car 2, remote control 3, Chinese and English manual 4, lithium battery 5, USB charger 6, tail 7, head up wheel 8, shock absorption adjustment buckle ring

9, metal pins 10, cross screwdriver 11, hexagonal socket 12, brushless version of the guide book inserts

Product features:

1, the use of simulation structure design, with a real car control feeling, to achieve the full ratio of stepless speed, high speed, rapid acceleration, deceleration, braking, reversing, left turn, right turn;

2、Applicable venues: flat ground, sand, mud, grass.

3, 4WD drive: front and rear upright spring damping, double-wishbone independent suspension system;

4, 2.4G full scale synchronous remote control system . Full ratio throttle/steering;

5, Metal differential, metal differential cup, powder planetary gear, powder active gear, powder main gear, metal front steering knuckle + metal rear axle block;

6, Metal CVD front driveshaft, metal rear dogbone, metal wheel cups;

7, Three-wire 17G digital servo;

8, 7.4V, 18650-1500mAh Li-ion battery (T plug), discharge rate 15C;

9, new remote control panel function: rudder volume size adjustment;

10, The whole car adopts 16 ball bearings;

11, metal second floor plate, metal front and rear arm code, metal centre drive shaft;

12, the car shell using high toughness explosion-proof PVC shell + high strength anti-roll skeleton;

13, the car shell is equipped with LED front light, LED roof front light, LED roof rear light; (three modes: normal light, slow flash, fast flash);

14, Equipped with head-up wheels